Click Above Picture To Enlarge |
|
Click Above Picture To Enlarge |
|
Click Above Picture To Enlarge |
| |
|
BryCoSystems
has been building dust suppression systems for nearly 10 years. During this time, we
have listened carefully to our customers needs and have manufactured some of the most
advanced dust suppression systems known. For years, dust suppression was attempted
through the use of mechanical filtration, such as a bag house or dust collector. As
times changed, the need for other methods of dust suppression became more apparent.
In applications such as C&D yards, Tipping Floors and Recycling Facilities,
controlling massive amounts of dust with the use of typical mechanical air filtration is
difficult, if not impossible to do. At BryCoSystems, we utilize the process of High
Pressure Water Atomization. In doing so, we are able to add a precision controlled,
fine water vapor, to the ambient air allowing the airborne dust to settle gently from the
air.
The success of
proper dust suppression brings with it many benefits, such as a healthier and safer work
environment for your employees, good community relations, a reduction in equipment and
facility maintenance...and much more. In addition, an average BryCoSystems Dust
Suppression Unit will delivery over 2,000,000 BTU's of evaporative cooling per hour to
benefit your facility and employees during the warmer months of the year. Whether
you are considering a dust suppression system due to a governmental regulation or simply
because you know it is the right step to take, please give us a call. We pride ourselves
in treating each and every inquiry as if it were our own.
In general, our
dust suppression systems range from 2 to 13 GPM, with an operating pressure of 800 to
1,500 PSI. We utilize a wide range of state-of-the-art timers to allow you precise
control of your system, Pumps and Motors, Stainless Steel Cabinetry, NEMA Electrical
Enclosures, UL and ETL listed electrical devices and quality components throughout.
We offer a vast selection of nozzles, each carefully matched to our customers needs.
|
|
Call Us Today,
Toll Free at 1-800-772-7926 to discuss your needs! |
|
|
|
|
Construction and Demolition (C&D) Facility - Dust
Suppression Application |
| |
Construction and Demolition (C&D) Facilities: The
issue faced by C&D Recycling Facilities is clearly dust. Installing a
BryCoSystems dust suppression unit, will enable you to bring dust control to not only your
facility in general, but to key dust generation points within. The process of
tipping in itself can be a major contributor to your dust control needs. However,
the processing of materials after they have been tipped are often the biggest issues, such
as screening, grinding and shredding. Dust suppression, when installed in key and
strategic locations can lead to a safer and healthier environment and better community
relations. Please call us today, Toll Free at 1-800-772-7926 to discuss your dust
control needs. |
|
| |
Paper and Corrugated Recycling Facility - Dust Suppression
Application |
| |
Paper and Corrugated Recycling Facilities: The processing
of paper and corrugated materials can create large amounts of airborne particulate.
These particles can quickly fill a facility and become a health hazard as well as a fire
hazard. The installation of a BryCoSystems dust suppression unit, with nozzles
strategically located, will result in a tremendous reduction of airborne dust. The
results, a cleaner, safer and healthier workplace for your employees. As shown
above, a very fine water vapor is carefully located to prevent dust from rising and
permeating the facility. Controlling dust at its point of generation is important.
Please call us today, Toll Free at 1-800-772-7926 to discuss your dust control needs. |
|
| |
Motor
Starters Housed
in NEMA Enclosure |
System
Control Box
During Production |
Dual
Pump
6 Zone Control Box |
OPEN
CABINET - DUST SUPPRESSION SYSTEMS - STANDARD FEATURES |
| |
- Constructed using UL/ETL Agency Listed
Components.
- Stainless Steel Cabinet - Base Plate with
Back Panel.
- System Controls Include: System On/Off
Switch, Run Time Meter, System On/Off Timer, Freez-Pro® System Blow Down
Timer, Green System On Indicator Light, Red Blow Down Indicator Light, Control Voltage
Transformer, Fuses and Relays housed in 12”x12”x6” Hinged NEMA Enclosure.
- Freez-Pro® System Blow Down Solenoid Valve,
24 VAC Coil - 3/8" NPT.
- Freez-Pro® System Blow Down High Pressure
Check Valve.
- Inlet Water Pressure Regulator - 1/2"
NPT.
- Inlet Water Pressure Gauge.
- Inlet Water Solenoid Valve with 24 VAC Coil
- 1/2" NPT.
- I.E.C. Style Motor Starter and Overload
Relay housed in Hinged 10"x8"x6" Hinged NEMA Enclosure.
- 24 VAC Fused Control Voltage.
- Vibration Isolators on Cabinet Base Plate
and Motor.
- CAT Triplex Pump/Motor, Pulley’s, Belt,
Belt Guard (belt driven units only), Pressure Gauge, Bypass, Thermal Overload,
Regulator and Oil Drain – 1/2" NPT Inlet, 3/8” NPT Discharge.
- Voltage: 120/1/60 - 480/3/60, depending on
Pump/Motor. 50Hz is also available upon request.
- All Wiring Properly Sized, Numbered and
Housed in Hubbell Water Tight Flex.
- An Optional High Pressure Drain Solenoid,
with Timer, is also available.
|
OPEN
CABINET - DIRECT DRIVE PUMP/MOTOR - DUST SUPPRESSION SYSTEMS |
MODEL
NUMBER |
FLOW - GPM @
1,000 PSI |
SYSTEM
VOLTAGE |
MOTOR
HORSE POWER |
CABINET
DIMENSIONS |
| OCFP-05DD-DS |
.05 |
120-240/1/60* |
1/2 |
Style "A" |
| OCFP-10DD-DS |
1.0 |
120-240/1/60* |
3/4 |
Style "A" |
| OCFP-20DD-DS |
2.0 |
120-240/1/60* |
3/4 |
Style "A" |
| OCFP-30DD-DS |
3.0 |
120-240/1/60* |
2 |
Style "A" |
| OCFP-40DD-DS |
4.0 |
120-240/1/60* |
3 |
Style "A" |
| OCFP-50DD-DS |
5.0 |
208-240/1/60* |
5 |
Style "A" |
OPEN
CABINET - BELT DRIVEN PUMP/MOTOR - DUST SUPPRESSION SYSTEMS |
MODEL
NUMBER |
FLOW - GPM @
1,000 PSI |
SYSTEM
VOLTAGE |
MOTOR
HORSE POWER |
CABINET
DIMENSIONS |
| OCFP-05BD-DS |
.05 |
120-240/1/60* |
1/2 |
Style "A" |
| OCFP-10BD-DS |
1.0 |
120-240/1/60* |
3/4 |
Style "A" |
| OCFP-20BD-DS |
2.0 |
120-240/1/60* |
3/4 |
Style "A" |
| OCFP-30BD-DS |
3.0 |
120-240/1/60* |
2 |
Style "A" |
| OCFP-40BD-DS |
4.0 |
120-240/1/60* |
3 |
Style "A" |
| OCFP-50BD-DS |
5.0 |
208-240/1/60* |
5 |
Style "A" |
| OCFP-60BD-DS |
6.0 |
208-240/1/60* |
5 |
Style "B" |
| OCFP-70BD-DS |
7.0 |
208-240/1/60* |
5 |
Style "B" |
| OCFP-80BD-DS |
8.0 |
208-240/1/60* |
7.5 |
Style "B" |
| OCFP-100BD-DS |
10.0 |
208-240/1/60* |
7.5 |
To Be Determined |
| OCFP-120BD-DS |
12.0 |
230/1/60* |
10 |
To Be Determined |
| OCFP-130BD-DS |
13.0 |
230/1/60* |
10 |
To Be Determined |
| |
* Please
select voltage at time of ordering; prices for 3 Phase and 50 Hz are also available upon
request. |
| |
|
|
OPEN
CABINET STYLE "A" |
OPEN CABINET STYLE
"B" |
|
Call Us
Today, Toll Free at 1-800-772-7926 to discuss your Dust Suppression needs! |
|
