OPEN CABINET - ODOR CONTROL and DUST SUPPRESSION SYSTEMS

BryCoSystems offers a wide range of cost effective, odor control and dust suppression systems for the most difficult of applications.  Our open cabinet odor control and/or dust suppression systems are available in a wide range of capacities and voltages as well as direct drive and belt driven pumps/motors. Whether your application is odor control or dust suppression, we are here to assist you with a solution. In fact, we have been solving odor and dust control issues for over 10 years. Unlike other companies, that only offer a hand full of systems to choose from, we listen very carefully to your needs and build a system based on your specific situation. The results...over 700 unique possibilities.  In odor control applications, each system is shipped with a high quality, fully adjustable Liquid Metering Pump.

Single Pump - Open Cabinet Odor Control and/or Dust Suppression Systems

Pump and Control Box - Open Cabinet Odor Control System

Application Examples

Offensive odors can come from a nearly endless number of sources, such as the obvious, trash and sewage, to the not so obvious, your favorite restaurant, a bakery or perhaps a high tech state-of-the-art manufacturing facility.  In all of these cases and many others, the process of odor control can be a simple one.  We manufacture odor control systems for ambient as well as in-duct applications.  Facilities are often forced to exhaust odor laden air in hopes of reducing the odor level within.  In doing so, the problem often becomes greater with complaints from neighboring business' or homes.  Odors can travel for miles and become a community issue very quickly.  Our odor control and dust suppression systems are available in a wide range of capacities from a few nozzles to several hundred.  We use state-of-the art controls, timers and misc. components to insure that your system is a true match to your needs.

Trash Transfer Stations:  The operators of Trash Transfer Stations continuously face the challenge of not only odor control, but dust suppression as well.  The more tipping that is done the more odor and often dust, that is generated.  BryCoSystems has the ability and track record to help you keep your odor and dust suppression problems under control.  Proper odor control brings with it many benefits, such as a healthier and safer work environment for your employees, good community relations and much more.  In addition, an average BryCoSystems odor control unit will delivery over 2,000,000 BTU's of evaporative cooling per hour to benefit your facility and employees during the warmer months of the year.  Whether you are considering an odor control system due to a governmental requirement or simply because you know it is the right step to take, please give us a call.

Construction and Demolition (C&D) Facilities:  The issue faced by C&D Recycling Facilities is clearly dust.  Installing a BryCoSystems dust suppression unit, will enable you to bring dust control to not only your facility in general, but to key dust generation points within.   The process of tipping in itself can be a major contributor to your dust control needs.  However, the processing of materials after they have been tipped are often the biggest issue, such as screening, grinding and shredding.  Dust suppression, when installed in key and strategic locations can lead to a safer and healthier environment.

High Pressure Brass and Stainless Steel Atomizing Nozzles with Anti Drip Check Valves

OPEN CABINET - ODOR CONTROL and DUST SUPPRESSION SYSTEMS - STANDARD FEATURES

• Constructed using UL/ETL Agency Listed Components.
• Stainless Steel Cabinet - Base Plate with Back Panel.
• System Controls Include: System On/Off Switch, Run Time Meter, System On/Off Timer, Freez-Pro® System Blow Down Timer, Green System On Indicator Light, Red Blow Down Indicator Light, Control Voltage Transformer, Fuses and Relays housed in 12”x12”x6” Hinged NEMA Enclosure.
• Liquid Metering Pump (odor control applications only).
• Freez-Pro® System Blow Down Solenoid Valve, 24 VAC Coil - 3/8" NPT.
• Freez-Pro® System Blow Down High Pressure Check Valve.
• Inlet Water Pressure Regulator - 1/2" NPT.
• Inlet Water Pressure Gauge.
• Inlet Water Solenoid Valve with 24 VAC Coil - 1/2" NPT.
• I.E.C. Style Motor Starter and Overload Relay housed in Hinged NEMA Enclosure.
• 24 VAC Fused Control Voltage.
• Vibration Isolators on Cabinet Base Plate and Motor.
• CAT Triplex Pump/Motor, Pulley’s, Belt, Belt Guard (belt driven units only), Pressure Gauge, Bypass, Thermal Overload, Regulator and Oil Drain – 1/2" NPT Inlet, 3/8” NPT Discharge.
• Voltage: 120/1/60 - 480/3/60, depending on Pump/Motor.  50Hz is also available upon request.
• All Wiring Properly Sized, Numbered and Housed in Hubbell Water Tight Flex.

OPEN CABINET - DIRECT DRIVE PUMP/MOTOR - ODOR CONTROL SYSTEMS

OPEN CABINET - BELT DRIVEN PUMP/MOTOR - ODOR CONTROL SYSTEMS

OPEN CABINET - DIRECT DRIVE PUMP/MOTOR - DUST SUPPRESSION SYSTEMS

OPEN CABINET - BELT DRIVEN PUMP/MOTOR - DUST SUPPRESSION SYSTEMS

* Please select voltage at time of ordering; prices for 3 Phase and 50 Hz are also available upon request.

OPEN CABINET STYLE "A"

OPEN CABINET STYLE "B"

Please Click Here For Closed Cabinet Systems